Blue screen on startup loop is one of the common issues in Windows 10. This can be very frustrating since the blue screen can ruin your work schedule. In some cases, the blue screen appears multiple times at regular intervals.There can be various reasons why this issue might occur. Let’s understand the major reasons behind this issue so that you are able to apply the relevant fixes. 

What Causes Blue Screen Loop On Windows 10?

There can be different reasons that might cause Windows 10 blue screen on startup loop. The most common ones are the errors in the internal software and hardware of the system. Malfunctions in some of the computer applications can also cause various errors in the system, including the blue screen loop. Also, one major cause of the Windows 10 blue screen loop is the issue with the latest hardware installation, Windows update, or a software update. The low-level software execution also results in the blue screen on startup loop issue. 

Windows encounters a stop error when a blue screen loop occurs. This causes Windows 10 to crash, and the only solution at this point is to restart your system. However, it leads to data loss if unsaved data is on the drives. 

How To Fix Window 10 Blue Screen On Startup Loop?

There are multiple fixes available to remove Windows 10 blue screen loop. However, you should first find out the possible reasons behind this issue and then apply the fix accordingly. Take a look at the following fixes to get rid of the blue screen loop on Windows 10. 

1. Disable Anti-Malware Protection

Anti-malware protection identifies malware according to its behavior and characteristics. However, it doesn’t compare the file to any known threats anymore. The protection uses sandboxing techniques to avoid malware attacks. It quickly splits malicious software from legitimate applications to prevent damage to the computer. But it also may cause Windows 10 blue screen loop, you can try to disable it and whether your computer can be fixed.

  • Restart the PC. 

  • On the Automatic Repair blue screen, click Advanced options.

    click-advanced-options
  • Click Troubleshoot.

    click-troubleshoot
  • Choose Advanced Options. 

    click-advanced-options
  • Select Startup Settings.

    select-startup

After successfully following the above steps, Windows will restart your system and provide you with a list of options. Select the Disable early launch anti-malware protection from the available list to disable it completely and get rid of the Windows 10 blue screen loop. 

2. Use Passfab Computer Managementnew

PassFab Computer Management is very effective in fixing the Windows 10 blue screen loop issue and prevents the system from getting stuck in a reboot loop. It is a powerful and useful tool which is not only help computer users to fix blue screen loop on windows 10, but also fix black screen, restarting, freeze error and etc.

  • Install and launch Passfab Computer Management in another computer that start.
  • Insert a USB to create a bootable disk. create boot disk now
  • Create a boot disk successfully, insert the USB into crash computer. creat boot disk successfully
  • Press “F12” or “ESC” continuously to enter into the boot menu.

    Tips:

    The key to enter Boot menu might be different on different motherboards. The common keys to enter Boot menu are F12 or ESC on popular computer brands.

    Boot Key Desktop Laptop Motherboard
    F12 ASUS, Acer, Founder, HP, Hasee, Haier, Lenovo, THTF Acer, BenQ, Dell, Emachines, eMachines, Fujitsu, Founder, GIGABYTE, Gateway, IBM, Lenovo, SAMSUNG, ThinkPad, Hasee, TOSHIBA, THTF, MSI Great Wall, Dell, TOSHIBA, Foxconn, GIGABYTE, Fujitsu, Gamen, Haier, IBM, Lenovo, Topstar, SONY, THTF, SAMSUNG, ThinkPad, Acer, HP, Hasee, Founder
    Esc Dell ASUS, Sony Great Wall, Foxconn, ESC, SOYO, MAXSUN, Colorful, SONY, SAMSUNG, Spark, UNIKA
    F9 BenQ, HP BISOTAR, HP
  • Click Automated Repair to start repairing and select the partition you need to repair. click automated repair select partition
  • Click Restart after the repairing completes. Then your computer would be start successfully. repair complete

3. Rebuild BCD

The Windows runtime environment has the most critical information in the form of BCD. It is necessary for a Windows boot loader when it is looking for boot information. BCD plays a major part in establishing boot timings and priorities. 

However, BCD also causes Windows 10 blue screen loop error when it fails to look for boot files due to damages or viruses. To get rid of the blue screen loop, please follow the steps below.

  • Restart your system and hold the F8 key until you enter Windows Recovery Environment. 

  • Click Repair your computer and select Troubleshoot. 

  • Select Command Prompt.

  • Type the following commands one by one and press Enter to execute each of them.

    • bootrec /fixmbr
    • type-command
    • bootrec /fixboot
    • type-command
    • bootrec /scanos
    • type-command
    • bootrec /rebuildbcd
    • type-command
  • Type exit and press Enter after it shows a message Successfully scanned Windows installations.

These steps will result in the successful rebuilding of key parts and will remove Windows 10 blue screen loop error too.

4. Repair Corrupted System Files

You should repair corrupt system files immediately as corrupt system files are also one of the reasons behind the Windows 10 blue screen loop error. Also, you can use Windows built-in System File Checker to troubleshoot your operating system regarding blue screen loop errors. Take a look at the steps below to repair corrupted system files. 

  • Restart your system and hold the F8 key until you enter Windows Recovery Environment. 

  • Click Repair your computer and select Troubleshoot.  

  • Select Command Prompt.

  • Type the following command and press Enter to execute it.

    • SFC /scannow
    • type-command
  • Wait for System File Checker to scan the system.

Restart your system after the scan is complete and check if the blue screen loop issue has resolved. In most cases, System File Checker fixes the issue of the corrupt files and removes the blue screen loop error. 

5. Disable Automatic Repair At Boot

The disabling of automatic repair is also effective to fix the Windows 10 blue screen loop error. Doing this will help you to boot directly on your Windows screen rather than going into a startup repair. However, this fix is only applicable if your system is working beneath the startup repair screen. Follow the below-mentioned steps to disable automatic repair at boot and fix Windows 10 blue screen loop error. 

  • Restart your system and hold the F8 key until you enter Windows Recovery Environment. 

  • Click Repair your computer and select Troubleshoot.  

  • Select Command Prompt.

  • Type the following command and press Enter to execute it.

    • bcdedit /set {default} recoveryenabled no
    • type-command
  • You can use an alternative command if the above command fails.

    • bcdedit /set {current} recoveryenabled no
    • type-command
  • Restart the system and check if your issue is fixed. 

Conclusion

Windows 10 blue screen loop issues can occur due to many reasons, and there are a number of fixes available to get rid of this error. However, if you are looking to effectively fix this error, you should have your hands-on PassFab Computer Management tool. The tool offers powerful and workable features to deal with Windows 10 blue screen loop errors and all the other similar windows issues.

COMMENT