Windows has established itself as the most popular operating system in the world. It boasts a user-friendly interface, enhanced security features, and regular updates. However, even the most popular OS isn't immune to glitches.
One common issue that Windows users often face is the Windows 10 "stuck on getting Windows ready" error. This error usually occurs during Windows updates or Windows installations.
If you're facing this issue, don't worry! In this article, we'll show you seven different methods that you can use to fix the Windows 10 stuck on getting Windows ready error.
- Option 1: Wait for Some Time
- Option 2: Check Your Network Connection
- Option 3: Use the Startup Repair Tool
- Option 4: Run System File Checker
- Option 5: Uninstall Recently Installed Update in Safe Mode
- Option 6: Perform a Clean Windows Installation
- Option 7: Uninstall Recently Installed Update
Part 1. Reasons That May Cause Stuck on Getting Ready on Windows 10 Error
Errors are a part of any operating system, and there can be several reasons that may cause the Windows 10 "stuck on getting ready" error. Your PC's smooth functioning may get disrupted due to any of the following reasons:
- A Windows update is being installed
- Corrupted Windows files
- A network interruption has occured
Part 2. How to Fix Getting Windows Ready Stuck Error
Option 1: Wait for Some Time
Sometimes, the best solution to a problem is the simplest one. If your Windows 10 installation or update is stuck on "Getting Windows ready," waiting may be all you need to do. The Windows update process can take a while to complete, so be patient and give it some time.
Option 2: Check Your Network Connection
A poor connection can also be the reason behind the Windows 10 stuck on getting Windows ready error.
To check your connection, simply open your web browser and try to load a website. If the website loads without any errors, then your connection is stable. If the website doesn't load, or if you see any errors, try restarting your router.
Option 3: Use the Startup Repair Tool
The Startup Repair tool is a Windows utility that can be used to fix corrupt system files. To launch the startup repair tool, you need to boot your PC into Windows recovery mode. To do this, follow the steps below:
Press the power button and hold down the shift key.
While your PC is starting up, keep pressing the shift key until you see a screen.
Upon restarting, you should see the Windows recovery options. Click on "troubleshoot."
Next, click on "advanced options."
Finally, click on "startup repair."
You will now be prompted to choose an account. Select the one that you want to use and enter the password. Not that only administrative accounts can be used to launch the startup repair tool.Once the startup repair tool has finished, restart your Windows and check if the issue has been fixed.
Option 4: Run System File Checker
The system file checker is a Windows utility that can be used to scan for and replace corrupt system files. This tool is designed to fix errors that may prevent Windows from starting up correctly.
To launch the system file checker, follow the steps below:
Press the Windows key + X on your keyboard.
Select "command prompt (admin)" from the menu.
If you're prompted by User Account Control, click "yes."
4.In the command prompt window, type the command sfc /scannow and press enter.
The system file checker will now start scanning your system for corrupt files.
Option 5: Uninstall Recently Installed Update in Safe Mode
An incomplete or corrupt Windows update can also cause the Windows 10 "stuck on getting ready" error. If this is the case, you can try uninstalling the update in safe mode.
Press the Windows key + I on your keyboard to open the Settings app.
Click on System Recovery > Advanced startup and then Restart now.
Your PC will now restart into the advanced startup options menu. From here, click on Troubleshoot > Advanced options > Startup Settings and then Restart.
Upon restarting, you should see a list of options. Press the 4 or F4 key to enter safe mode.
Now in safe mode, Select the View installed updates option from the left pane. After that, locate and select the update that you want to uninstall and click on the Uninstall button.
Once the update has been uninstalled, restart your PC and check if the Windows 10 stuck on getting Windows ready error has been fixed.
Option 6: Perform a Clean Windows Installation
If none of the above methods work, you can try performing a clean Windows installation. This will delete all your files and data, so be sure to back up any important data before proceeding.
To perform a clean Windows installation, follow the steps below:
Use the installation disk or drive to start your PC.
Select "Install Now."
On the next screen, select "Custom: Install Windows only (advanced)."
Select the hard drive or partition that you want to install Windows on and click on Next.
Windows will now start installing. Once the installation is complete, check if the Windows 10 install "stuck on getting ready" error has been fixed.
Option 7: Uninstall Recently Installed Update
If you recently installed an update and started seeing the Windows 10 install "stuck on getting ready" error, chances are that the update is the culprit. You can try uninstalling the update and see if it fixes the problem.
Open Control Panel and go to Programs and Features
Click on "View installed updates" in the left sidebar.
A list of all the updates that have been installed on your computer will now be displayed. Select the most recent update and click on Uninstall.
After the update has been uninstalled, restart your computer and check if the problem has been fixed.
Part 3. Bonus: How to Remove Duplicate Files on Windows 10?
Duplicate files are the leading cause of clutter on your hard drive. Not only do they take up valuable space, but they can also slow down your computer. If you're wondering how to remove duplicate files on Windows 10, PassFab for Windows is the answer.
PassFab Duplicate File Deleter is a powerful duplicate file finder that can help you quickly and easily find and delete duplicate files on your computer. With its easy-to-use interface, you can scan your entire hard drive for duplicates in just a few clicks.
Here's how to remove duplicate files on Windows 10
- Download in the computer and install it
- Add folders and start scanning
- Choose and remove duplicate files successfully
For more information about delete duplicate files on your windows 10, please check this guide.
FAQs to Fix Stuck on Getting Ready on Windows 10
1. How do I fix Windows 10 stuck on getting Windows ready?
If you're stuck on the "getting Windows ready" screen, it usually means that an update is being installed. However, if the problem persists, you can try some of the following methods:
- Try the Windows Safe Mode
- Unplug any external devices
- Perform a clean Windows installation
2. How long should I wait for getting Windows Ready?
This process can take a few minutes to a few hours, depending on the size of the update. However, if the problem persists for more than 3 hours, you can try some of the methods listed above.
3. What does it mean when Windows says getting Windows ready?
When Windows says "Getting Windows ready," it means that an update is being installed on your device. This message usually appears when a major update, such as the Anniversary Update, is being installed.
The Windows 10 stuck on getting Windows ready error can be frustrating, but there are a few things you can try to fix it. The steps above should help you get rid of the Windows 10 stuck on getting Windows ready problem for good.
Since duplicate files are the leading cause of this error, we recommend using PassFab Duplicate File Deleter to remove them from your computer. With its easy-to-use interface and powerful duplicate file finder, you can quickly and easily delete duplicates from your computer.